
Add to Cart
Wood products microwave drying sterilizing equipment
1. Characteristics:
High speed drying, high efficiency, 25-50L pine board drying faster than commonly used convection drying speed 20-30times faster. Wood moisture from 30% to 12%, only 15-20 minutes.
Uniform drying, non-deformation, non-cracking. The microwave drying Simultaneously effect inside and outside the wood, so the wood drying thoroughly improve the quality of products, the surface will not harden, improve toughness, ensure no crack, no deformation, no discoloration, and correction bent degree etc…
Anti-moth, anti-mildew, extend the storage period. Microwave drying can penetrate the wood inside, and kill the worms in the wood quickly.
High efficiency and energy saving. The utilization rate of microwave as energy can reach over 75% and the energy consumption is reduced by more than 25% compared with the far infrared and steam drying.
Easy operation, save labor.
Safety and health, environmental protection. Microwave treatment of wood no noise, no pollution.
Technical Parameters:
Models | Working Frequency | Input Power (no more than) | Microwave Output Power (no less than) | Size (m) | Dehydrated Level (no less than) | Sterilization Capacity | ||
HL-12HMV-3X | 2450MHz | 18kw | 12kw | 7.2x0.65x1.8 | 12kg/h | 100-150kg/h | ||
HL-15HMV-4X | 2450MHz | 20kw | 15kw | 8.3x0.72x1.8 | 15kg/h | 120-180 kg/h | ||
HL-20HMV-4X | 2450MHz | 26kw | 20kw | 8.5x0.75x1.8 | 20kg/h | 180-250 kg/h | ||
HL-30HMV-6X | 2450MHz | 36kw | 30kw | 10.5x0.95x2.0 | 30kg/h | 280-350 kg/h | ||
HL-40KW-6X | 2450MHz | 46kw | 40kw | 10.5x1.05x2.0 | 40kg/h | 380-450 kg/h | ||
HL-50KW-8X | 2450MHz | 58kw | 50kw | 12.2x1.2x2.0 | 50kg/h | 480-550 kg/h | ||
HL-60HMV-8X | 2450MHz | 68kw | 60kw | 13.5x1.2x2.0 | 60kg/h | 500-600 kg/h | ||
HL-70HMV-10X | 2450MHz | 78kw | 70kw | 13.5x1.55x2.0 | 70kg/h | 700-800 kg/h | ||
HL-80HMV-10X | 2450MHz | 90kw | 80kw | 15.5x1.55x2.0 | 80kg/h | 800-900 kg/h | ||
HL-100HMV-12X | 2450MHz | 110kw | 100kw | 16.5x1.75x2.0 | 100kg/h | 1000-1200 kg/h |